Known Issues
Summary of known issues for HIL604 hardware devices
Symptom |
Some HIL devices exhibit turn on-transients during configuration time of the internal SoC. Transients appear on power supplies, analog outputs, and digital outputs. The duration of these transients is up to 3 seconds. |
Cause |
Issue in design. |
Devices affected |
HIL 604 - units up to 00604-00-00075 |
Symptom |
IRIG-B signal doesn’t reach the simulation. |
Cause |
Issue in design, there is a missing ground reference. |
Devices affected |
HIL604 – units up to 00604-00-00075 |
Fix |
Connect shield of the BNC connector to any HIL GND point, such as: PPS connector shield, RS232 connector screw. |