version = 4.2

//
// Saved by sw version: 2024.4 SP1
//

model "boost" {
    configuration {
        hil_device = "VHIL+"
        hil_configuration_id = 1
        simulation_method = exact
        simulation_time_step = auto
        simulation_discret_scaling = 1.0
        dsp_timer_periods = 100e-6, 50e-3
        ss_calc_method = "systematic elimination"
        enb_pole_shift = True
        enb_gds_oversampling = True
        show_modes = False
        device_ao_limit_enable = False
        reset_analog_outputs_on_sim_stop = True
        reset_analog_outputs_on_sim_stop_mode = Offset values
        reset_digital_outputs_on_sim_stop = True
        vhil_adio_loopback = False
        cpl_stb = False
        enb_dep_sw_detect = False
        code_section = "internal memory"
        data_section = "internal memory"
        sys_sp_rate_1 = 0.0001
        sys_sp_rate_2 = 0.05
        sys_real_type_precision = "default"
        user_real_type_precision = "default"
        sys_cpu_optimization = "high"
        user_cpu_optimization = "high"
        user_cpu_part_option = "default"
        matrix_based_reduction = True
        cpl_dynamics_analysis = False
        export_ss_to_pickle = False
        ground_scope_core = False
        dss_num_tol = 1e-15
        cce_platform = "generic"
        cce_use_relative_names = False
        cce_type_mapping_real = "double"
        cce_type_mapping_uint = "unsigned int"
        cce_type_mapping_int = "int"
        cce_platform = "generic"
        cce_use_relative_names = False
        cce_type_mapping_real = "double"
        cce_type_mapping_uint = "unsigned int"
        cce_type_mapping_int = "int"
        cce_directory = ""
        cce_custom_type_int = ""
        cce_custom_type_uint = ""
        cce_custom_type_real = ""
        tunable_params = "component defined"
        sp_compiler_type = "C compiler"
        sig_stim = "off"
        export_resource_list = ""
        export_dependency_list = ""
        excluded_resource_list = ""
        excluded_component_from_locking_list = ""
        export_out_file = ""
        export_lock_top_level = True
        export_encrypt_library = True
        export_encrypt_resources = True
        solver_type = "DAE"
        integration_method = "BDF"
        max_sim_step = 1e-4
        simulation_time = 0.1
        abs_tol = 1e-3
        rel_tol = 1e-3
        init_sim_step = 1e-6
        r_on_sw = 1e-3
        v_on_diode = 0.2
        data_sampling_rate = 0
        feedthrough_validation_error_level = error
    }

    component Subsystem Root {
        component "core/Inductor" L1 {
            inductance = "470e-6"
            signal_access = "Inherit"
        }
        [
            position = 8400, 8256
        ]

        component "core/Capacitor" C1 {
            capacitance = "56e-6"
            signal_access = "Inherit"
        }
        [
            position = 8704, 8344
            rotation = right
        ]

        component "core/Resistor" R1 {
            resistance = "100"
        }
        [
            position = 8776, 8360
            rotation = right
        ]

        component "core/Diode" Diode1 {
            model_load_legacy = "1"
        }
        [
            position = 8608, 8256
            size = 64, 32
        ]

        component "core/MOSFET" MOSFET1 {
            ctrl_src = "Model"
            model_load_legacy = "1"
            signal_access = "Inherit"
        }
        [
            position = 8508, 8352
            size = 48, 64
        ]

        component "core/Ground" gnd1 {
        }
        [
            position = 8508, 8520
        ]

        component "core/Voltage Source" Vs1 {
            init_const_value = "12"
        }
        [
            position = 8304, 8356
            rotation = right
        ]

        component "core/Square Wave Source" "Square Wave Source1" {
            duty_cycle = "0.1"
            frequency = "50e3"
            hs_output = "2"
        }
        [
            position = 8412, 8352
        ]

        component "core/Voltage Measurement" Va1 {
        }
        [
            position = 8848, 8364
            rotation = right
            size = 64, 32
        ]

        component "core/Scope" Scope1 {
            selected_signals = "[\"Va1\"]"
            signals_data = "{\"signals\": {\"Va1\": {\"viewports\": [1], \"type\": \"analog\", \"color\": {\"1\": \"#FF0000\"}, \"display\": {\"1\": \"solid\"}}}, \"viewports\": {\"1\": {\"log_scale_x\": false, \"log_scale_y\": false, \"y_axis_db\": false}, \"2\": {\"log_scale_x\": false, \"log_scale_y\": false, \"y_axis_db\": false}, \"3\": {\"log_scale_x\": false, \"log_scale_y\": false, \"y_axis_db\": false}, \"4\": {\"log_scale_x\": false, \"log_scale_y\": false, \"y_axis_db\": false}}, \"plot_settings\": {\"layout\": \"Vertical\", \"background_color\": \"white\", \"legend_visible\": true}}"
        }
        [
            position = 8172, 8284
        ]

        junction Junction1 pe
        [
            position = 8508, 8256
        ]

        junction Junction2 pe
        [
            position = 8704, 8256
        ]

        junction Junction3 pe
        [
            position = 8704, 8448
        ]

        junction Junction4 pe
        [
            position = 8508, 8448
        ]

        junction Junction5 pe
        [
            position = 8776, 8256
        ]

        junction Junction6 pe
        [
            position = 8776, 8448
        ]

        connect MOSFET1.D Junction1 as Connection13
        connect Junction1 L1.n_node as Connection14
        [
            breakpoints = 8508, 8256; 8448, 8256
        ]
        connect Diode1.A Junction1 as Connection15
        connect C1.p_node Junction2 as Connection16
        connect Diode1.K Junction2 as Connection18
        connect C1.n_node Junction3 as Connection19
        [
            breakpoints = 8704, 8448
        ]
        connect Vs1.p_node L1.p_node as Connection22
        connect Junction3 Junction4 as Connection23
        connect Junction4 MOSFET1.S as Connection24
        [
            breakpoints = 8508, 8448; 8508, 8396
        ]
        connect Vs1.n_node Junction4 as Connection25
        connect Junction4 gnd1.node as Connection26
        connect Junction2 Junction5 as Connection28
        [
            breakpoints = 8704, 8256
        ]
        connect Junction5 R1.p_node as Connection29
        [
            breakpoints = 8776, 8256; 8776, 8320
        ]
        connect Va1.p_node Junction5 as Connection30
        connect Junction3 Junction6 as Connection31
        [
            breakpoints = 8688, 8448
        ]
        connect Junction6 R1.n_node as Connection32
        connect Va1.n_node Junction6 as Connection33
        connect MOSFET1.ctrl_in "Square Wave Source1.out" as Connection34
    }

    default {
        "core/Capacitor" {
            signal_access = "inherit"
            capacitance = "1e-6"
            initial_voltage = "0"
            pole_shift_ignore = "False"
            visible = "True"
        }

        "core/Inductor" {
            signal_access = "inherit"
            inductance = "1e-3"
            initial_current = "0.0"
            pole_shift_ignore = "False"
            visible = "True"
        }

        "core/Resistor" {
            resistance = "1"
            param_set = ""
        }

        "core/Scope" {
            signals_data = "{}"
            selected_signals = "[]"
        }

        "core/Square Wave Source" {
            hs_output = "1"
            ls_output = "0"
            frequency = "50"
            duty_cycle = "0.5"
            phase = "0"
            signal_type = "real"
            execution_rate = "100e-6"
            _tunable = "False"
        }

        "core/Voltage Source" {
            sig_input = "False"
            type = "signal generator"
            param_set = "1phase"
            parent_label = ""
            dtsm_switch_name = ""
            addr = "0"
            spc_nb = "0"
            execution_rate = "100e-6"
            cpd_visible = "True"
            enable_snb = "False"
            snb_type = "R2"
            R2 = "0.0"
            L1 = "0.1"
            override_signal_name = "False"
            signal_name = ""
            init_source_nature = "Constant"
            init_const_value = "0.0"
            init_rms_value = "0.0"
            init_frequency = "50.0"
            init_phase = "0.0"
        }

        "core/Diode" {
            signal_access = "inherit"
            switches_option = "False"
            resistance = "1.0"
            snb_type = "none"
            R = "100e3"
            C = "1e-6"
            show_monitoring = "False"
            losses_estimation = "False"
            Import_diode_xml = "not selected"
            Vd = "1.2"
            Rd = "0"
            i_sw = "[0.0, 6.0, 12.0, 18.0, 24.0]"
            v_sw = "[0.0, 600.0]"
            temp_sw = "[25.0, 50.0, 75.0, 100.0, 125.0]"
            vd_table_out = "[1.2, 1.2, 1.2, 1.2, 1.2]"
            ed_off_table_out = "[[0.0, 0.0275e-3, 0.15e-3, 0.275e-3, 0.3e-3], [0.35*2.2e-3, 0.4*2.2e-3, 0.8*2.2e-3, 0.68*2.2e-3, 0.9*2.2e-3], [0.65*2.2e-3, 0.9*2.2e-3, 1.2*2.2e-3, 1.5*2.2e-3, 1.7*2.2e-3], [0.9*2.2e-3, 1.3*2.2e-3, 1.7*2.2e-3, 1.9*2.2e-3, 2.25*2.2e-3], [1.1*2.2e-3, 1.7*2.2e-3, 2.1*2.2e-3, 2.3*2.2e-3, 2.5*2.2e-3]]"
            temp_estimation = "False"
            thermal_networks_type = "Foster"
            diode_Rth = "[0.159, 0.133, 0.120, 0.038]"
            diode_Tth = "[1.1e-1, 1.56e-2, 1.35e-3, 1.51e-4]"
            diode_Cth = "[0.0029, 0.0097, 0.1068, 0.8500]"
            loss_exec_rate = "100e-6"
            dtsm_switch_name = ""
            model_load_legacy = "0"
        }

        "core/MOSFET" {
            signal_access = "inherit"
            switches_option = "False"
            resistance = "1.0"
            ctrl_src = "Digital inputs"
            dtsm_switch_name = ""
            dtsm_switch_ctrl = ""
            op_mode = "Fixed carrier frequency"
            carrier_freq = "10000.0"
            carr_ph_offset = "0.0"
            d_time = "5e-6"
            ref_sig_min_max = "[-1.0, 1.0]"
            load_mode = "on min"
            S1 = "1"
            S1_logic = "active high"
            execution_rate = "inherit"
            snb_type = "none"
            R = "100e3"
            C = "1e-6"
            spc_nb = "0"
            addr = "0"
            show_monitoring = "False"
            switches_names_at_mask = "[]"
            pwm_enabling = "False"
            pwm_enable_di = "13"
            pwm_enable_inv = "active high"
            model_load_legacy = "0"
            losses_estimation = "False"
            Import_igbt_xml = "not selected"
            Import_diode_xml = "not selected"
            i_sw = "[0.0, 6.0, 12.0, 18.0, 24.0]"
            v_sw = "[0.0, 600.0]"
            temp_sw = "[25.0, 50.0, 75.0, 100.0, 125.0]"
            vce_table_out = "[1.3, 1.3, 1.3, 1.3, 1.3]"
            vd_table_out = "[1.2, 1.2, 1.2, 1.2, 1.2]"
            et_on_table_out = "[[0.0, 0.0275e-3, 0.15e-3, 0.275e-3, 0.3e-3], [0.35*3.8e-3, 0.4*3.8e-3, 0.8*3.8e-3, 0.68*3.8e-3, 0.9*3.8e-3], [0.65*3.8e-3, 0.9*3.8e-3, 1.2*3.8e-3, 1.5*3.8e-3, 1.7*3.8e-3], [0.9*3.8e-3, 1.3*3.8e-3, 1.7*3.8e-3, 1.9*3.8e-3, 2.25*3.8e-3], [1.1*3.8e-3, 1.7*3.8e-3, 2.1*3.8e-3, 2.3*3.8e-3, 2.5*3.8e-3]]"
            et_off_table_out = "[[0.0, 0.0275e-3, 0.15e-3, 0.275e-3, 0.3e-3], [0.35*2.1e-3, 0.4*2.1e-3, 0.8*2.1e-3, 0.68*2.1e-3, 0.9*2.1e-3], [0.65*2.1e-3, 0.9*2.1e-3, 1.2*2.1e-3, 1.5*2.1e-3, 1.7*2.1e-3], [0.9*2.1e-3, 1.3*2.1e-3, 1.7*2.1e-3, 1.9*2.1e-3, 2.25*2.1e-3], [1.1*2.1e-3, 1.7*2.1e-3, 2.1*2.1e-3, 2.3*2.1e-3, 2.5*2.1e-3]]"
            ed_off_table_out = "[[0.0, 0.0275e-3, 0.15e-3, 0.275e-3, 0.3e-3], [0.35*2.2e-3, 0.4*2.2e-3, 0.8*2.2e-3, 0.68*2.2e-3, 0.9*2.2e-3], [0.65*2.2e-3, 0.9*2.2e-3, 1.2*2.2e-3, 1.5*2.2e-3, 1.7*2.2e-3], [0.9*2.2e-3, 1.3*2.2e-3, 1.7*2.2e-3, 1.9*2.2e-3, 2.25*2.2e-3], [1.1*2.2e-3, 1.7*2.2e-3, 2.1*2.2e-3, 2.3*2.2e-3, 2.5*2.2e-3]]"
            temp_estimation = "False"
            thermal_networks_type = "Foster"
            switch_Rth = "[0.159, 0.133, 0.120, 0.038]"
            switch_Tth = "[1.1e-1, 1.56e-2, 1.35e-3, 1.51e-4]"
            switch_Cth = "[0.0029, 0.0097, 0.1068, 0.8500]"
            diode_Rth = "[0.159, 0.133, 0.120, 0.038]"
            diode_Tth = "[1.1e-1, 1.56e-2, 1.35e-3, 1.51e-4]"
            diode_Cth = "[0.0029, 0.0097, 0.1068, 0.8500]"
            loss_exec_rate = "100e-6"
        }

        "core/Voltage Measurement" {
            signal_access = "inherit"
            bw_limit = "False"
            frequency = "10e3"
            comparator_enable = "False"
            operator = "greater"
            threshold = "0"
            cmp_abs_value = "False"
            feed_forward = "false"
            sig_output = "False"
            sig_output_filt_and_full_bw = "False"
            execution_rate = "100e-6"
            addr = "0"
            nd_msr_estimation = "false"
            dev_cpl_msr = "false"
            host_device = "0"
            output_to_device = "0"
            dev_cpl_index = "0"
            dev_cpl_var_nb = "0"
            visible = "True"
            override_signal_name = "False"
            signal_name = ""
        }
    }
}