AIT HIL Controller
Accelerate your power converter control development and deployment with the cost-effective, proven, and reliable controller platform.
Develop model-based control graphically directly from the Typhoon HIL Control Center environment, auto-generate control code, and straightforwardly integrate with the AIT firmware stack into one-click-ready-to-build target application firmware.
HIL & Controller bundle
True plug and play, with no additional signal conditioning required to interface your HIL Controller with any of your Typhoon HILās real-time devices. Like your HIL, every HIL Control is a HIL Compatible building block for your high fidelity real-time HIL testbed.
Single platform
Build a real-time digital replica of your preferred grid-code compliant power converter, with ease:
- Set the nominal power rating & grid settings.
- Select between grid support function or grid forming modes.
- Tailor the model of your power conversion application (power system feeder, micro-grid, off-grid system, etc.)
- Execute various test cases within the Typhoon HIL Control Center (or any other open-source test platforms).
- Validate your power system control and operation strategies.
- Conduct grid integration and interoperability studies.
No coding
Develop model-based control graphically directly from Typhoon HIL Schematic Editor without a need to write C code manually (unless you really want to).
- Auto-generate control code in few clicks.
- Straightforwardly integrate with the AIT firmware stack into one-click-ready-to-build target application firmware.
- Upload the application firmware into your target controller via the secure AIT built-in bootloader and Boot Flasher application (no JTAG required!).
- Test and validate the control design with your Typhon HIL system.
- Plug the controller into your target power converter, and run it!
Directly from HIL SCADA
Build your own graphical user interface by utilizing a wide selection of HIL SCADA widgets.
Access the application parameters and the controller settings via AIT CLI.
Hardware Protections and FW Faults
- Built-in hardware protections designed to ensure the protection of your power converter hardware
- Application-specific and user settable firmware faults
- AIT Data Logger ā log the target application and power converter data into the CSV file
- AIT Scope/Phasor/Locus tool ā a powerful diagnostic tool, able to capture the internal controller waveforms, state space vectors, statuses, and display them as scope snapshot-, phasor- and locus-diagrams
EV rapid control prototyping with the Infineon-Typhoon HIL solution
Working in a simulated real-time environment allows for observing control behavior in diverse scenarios with the safety of personnel and equipment guaranteed, since power flows are represented digitally instead of physically.
Assistant Professor at the Faculty of Technical Sciences of the University of Novi Sad
